What Size of Particles Can Heavy-Duty Gravel Pumps Handle?
The maximum particle size that a heavy-duty gravel pump can handle depends on the impeller passage, suction inlet, discharge outlet, and casing design of the specific model. Without technical data, a general promise cannot be made regarding the conveyance of sand, gravel, or solid materials of any size.
When selecting a model, providing only the "maximum particle size" is not enough. You should also specify: the primary particle size range; the proportion of the maximum particles; whether the particles are rounded or sharp; particle hardness; the presence of crushed stone, shells, or metallic debris; the presence of wood chunks or long fibers; slurry solid content and density; and whether the particles settle easily.
Larger, harder, or sharper particles increase impact and wear on the impeller, pump casing, and piping. The fact that a particle can pass through the pump for a short period does not mean the pump is suitable for long-term, stable handling of such media.
If the on-site particle sizes vary significantly, it is recommended to provide material photos, sieve analysis data, or actual physical dimensions. Technical personnel can evaluate suitability based on the impeller passage and pump casing design, and confirm the wet-end materials and operating speed.
For operating conditions involving large debris, it is also advisable to evaluate inlet screening, separation, or other protective measures to reduce the risk of foreign objects jamming the impeller or damaging the pump casing.
.png "CG/CGH Heavy-Duty Gravel Pump")
